Encore ENL832-TX-RE Especificações

Consulte online ou descarregue Especificações para Placas de rede Encore ENL832-TX-RE. ENCORE ENL832-TX-RE Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 17
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
FCC Statement
This device compiles with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Warning! This equipment has been tested
and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
1
Vista de página 0
1 2 3 4 5 6 ... 16 17

Resumo do Conteúdo

Página 1 - FCC Statement

FCC Statement This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not caus

Página 2 - CE-Mark Warning

After choosing the <Run Diagnostics on Board> item, the screen will display like, Node ID...: 00 e0 7d c0 00 01 Network Speed..: 100Mbp

Página 4 - 2. Installation

For the <Run Diagnostics On Network> test Master Machine: Master machine sends magic packet or Wake up frame through the network. T

Página 5 - 2.2 Install the Adapter

Quick Installation Guide Please take the following steps for driver installation. Microsoft Windows 95/98/ME 1. Turn off the computer. 2. Insert t

Página 6

Windows NT 1. Turn off the computer. 2. Insert the adapter into the available PCI slot. 3. Restart the computer. 4. Click “Start” menu bar and select

Página 7

Microsoft Windows 2000 1. Turn off the computer. 2. Insert the adapter into the available PCI slot. 3. Restart the computer. 4. After Microsoft Windo

Página 8 - 2.6 Software Installation

Microsoft Windows XP 1. Turn off the computer. 2. Insert the adapter into the available PCI slot. 3. Restart the computer. 4. After Microsoft Windows

Página 9 - 2.7 Test Program

Novell Netware System Please execute the following commands: For Netware Client LSL RTSODI IPXODI NETX or VLM F: LOGIN <USERNAME> For Netware

Página 10

CE-Mark Warning In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Página 11

1. Introduction Congratulations on the purchasing of your new 10/100 NWay Fast Ethernet PCI adapter. This document describes the Installation of netw

Página 12

y Network drivers on the diskette for Windows 95, 98, ME, NT, 2000, XP, NetWare, Unix and Packet driver. y FCC, CE certification 1.2 System Requir

Página 13 - Quick Installation Guide

2.1 Unpack and Inspect Caution: Under ordinary circumstances, this adapter card will not be affected by static charge as may be received through your

Página 14

firmly into the connector to PCI slot. Please make sure that the card’s contacts are fully seated in the PCI slot. 4. Install the bracket screw that

Página 15

2.3 Connect Fast Ethernet Category 5 UTP cable is required for Fast Ethernet operation. The maximum cable run between the adapter and the supporting

Página 16

2.5 Drivers and User’s manual Diskette The [Divers and User’s manual] diskette contains all the popular operating system drivers. y Novell NetWare(

Página 17

2.7 Test Program This test program verifies configuration of the adapter and assists the isolation of any faults in operation. Test procedure are

Comentários a estes Manuais

Sem comentários