Encore SATA2 RAID PCIE CARD VER. 2.00 Manual do Utilizador

Encore SATA2 RAID PCIe Card User Manual Ver. 2.00 All brand names and trademarks are properties of their Resp

Mar/07 MN 10Press Y to confirm. 7. Select Rebuild Raid 1 Set, press Enter. 8. When asked Are you sure(Y/N)?, p

Mar/07 MN 11function properly, this old metadata must be first overwritten with the new metadata. To resolve thi

Mar/07 MN 12controller in another PCI Express slot. During this (POST) process, the BIOS will show up and indica

Mar/07 MN 13passed Microsoft compatibility testing, this message appears during new installation. For An Exist

Mar/07 MN 14the “Driver\x86” folder, found on the driver CD, onto a blank floppy disk then follow the directions

Mar/07 MN 15boxes, click Next, then click Next again. 5. If the Digital Signature Not Found message appears, cl

Mar/07 MN 16(Change A:\ to match your floppy drive letter) 6. Follow the on-screen instructions to complete the

Mar/07 MN 17properties. A message this device is working properly is displayed in the dialog box, the driver has

Mar/07 MN 2Features and Benefits z Compliant with PCI Express Base Specification 1.0a z Compliant with Serial

Hardware Description Mar/07 MN 3

Mar/07 MN 4Jumper Settings JP Description Active Port 1-2 close Enable SATA Connector 1 J1-J4 2-3 close Enabl

Mar/07 MN 5down firmly, but gently, until it is well seated. 6. Replace the slot bracket’s holding screw to sec

Mar/07 MN 6Auto configuration (recommended) The default chunk size is 64k when selecting Auto configuration. 1.

Mar/07 MN 75. Select chunk size from 8k, 16k, 32k, 64k or 128k, then press Enter. 6. Select the first dri

Mar/07 MN 87. Press Ctrl+E to exit the BIOS. 8. When asked Are you sure to exit(Y/N)?, press Y to exit and re

Mar/07 MN 911. When asked Are you sure to exit(Y/N)?, press Y to exit and reboot. CONCATENATION (JBOD) This