Encore SATA2 RAID PCIE CARD VER. 2.00 Manual do Utilizador descarregar pdf (Página 7)

Mar/07 MN

5. Select chunk size from 8k, 16k, 32k, 64k or 128k, then press

Enter.

6. Select the first drive, press Enter.

7. Select the second drive, press Enter.

8. Input the RAID size, press Enter.

9. When asked Are You Sure(Y/N)?, press Y to accept.

10. Press Ctrl+E to exit the BIOS.

11. When asked Are you sure to exit(Y/N)?, press Y to exit and

reboot.

12. Continue with FDISK and FORMAT steps as if you were

installing a conventional hard drive.

RAID 1 (Mirror)

For New/Blank Hard Drives

1. As the BIOS boots press Ctrl+S or F4 when prompted to enter

the RAID BIOS.

2. At the next screen select Create RAID Set, then press Enter.

3. At the next screen select RAID1 then press Enter.

4. Select Auto configuration, then press Enter.

5. Input the RAID size, press Enter.

6. When asked Are You Sure(Y/N)?, press Y to accept.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Sem comentários

Encore SATA2 RAID PCIE CARD VER. 2.00 Manual do Utilizador Página 7